.png)
RELATED PRODUCTS NOT AVAILABLE
true
BD Plastipak™ - 3-Piece Syringe
Complies with international standards (ISO 7886-1)† for volumetric accuracy and leak-tight performance
- Overview
- Products & Accessories
- EIFU & Resources
false
Luer Lock Tip
Generally used for injections requiring a secure connection of the syringe to another device.
Concentric Luer Slip Tip
The concentric luer slip tip provides a friction-fit connection that requires you to push and twist the syringe tip into the needle hub.
Eccentric Luer Slip Tip
The eccentric luer slip tip allows for lower angle of injection in closer proximity to the skin.
Catheter Tip
The catheter tip is used for flushing catheters, gastostomy tubes and other devices.
General Properties
- Clear barrel for visualization of syringe content
- Bold scale printing to aid in setting for a more accurate dosage of medication
- Special silicone lubrication ensures that plunger moves smoothly and evenly
- Retaining ring to prevent accidental plunger rod withdrawal
General Properties
- Leak-tight
- Validated for use on most infusion pumps** including BD Alaris™ Infusion Pumps
- Natural rubber latex is not part of the material formulation
- Sterile (also available as non-sterile), single-use
BD Plastipak™, 50 mL dosage
- Perfusion syringes, 50 mL syringes, are designed for short term use in syringe pumps (active IIa devices) for the administration of pharmaceuticals
- The 50 mL Catheter Tip Syringes have a long tapered tip designed to aid in irrigation or for connection to non-ISO compatible Luer connections such as nasogastric tubes
BD Plastipak™, 1 mL low dosage
- Low dose syringes make it easier to accurately measure a small dose than with large capacity syringes
- Available without or with needles (25G, 26G, 27G or 30G)
- 1 mL syringes with 0.01 mL, I.U 40 or I.U 100 graduations
- The BD Plastipak™ Test and Sub-Q syringes are mainly designed for administering allergens in the desensitization treatment of allergies
false
true
false
true
Please note, not all products, services or features of products and services may be available in your local area. Please check with your local BD representative.
†For all syringe sizes except 10 mL BD Plastipak™ Syringe with Luer-Lok™ Tip (SKU: 300912) produced at BD Canaan, CT manufacturing facility.
*Manual use +/- 1.5% of nominal capacity plus 1-2% of expelled volume.
**Check with syringe pump manufacturer or syringe pump manual for compatibility of syringe with specific syringe infusion pumps
Catalogue number 301028 is not CE marked but produced under the same conditions as the CE mark, such as the same certified quality management system, the same raw materials, manufacturing instructions and in-process and final inspection as the CE marked equivalent.
BD-26144
true